Self Adhesive Bubble Foil Insulation Roll

Product Description

Our Self Adhesive Bubble Foil Insulation Roll is a lightweight, high-performance reflective insulation ideal for use in vehicles such as camper vans, motorhomes, classic cars, and commercial vans.

Featuring a foil-faced bubble core with a strong self-adhesive backing, this insulation is simple to install — just peel and stick to clean surfaces such as roofs, side panels, doors, and tailgates.

Once fitted, it helps reduce heat loss, minimise condensation, and improve thermal comfort year-round. The reflective foil layer keeps your vehicle cooler in summer by reflecting radiant heat and warmer in winter by retaining internal warmth.

Key Features

• Self-adhesive backing for quick, clean installation

• High-quality reflective foil surface for enhanced thermal performance

• Flexible and lightweight – easy to cut and shape around contours

• Water-resistant and wipe-clean finish

• Reduces condensation and helps control interior temperature

• Suitable for a wide range of vehicle insulation projects

Technical Information

• Roll Size: from 1m x 1m (≈10.8 sq ft)

• Nominal Thickness: Approx. 3mm

• Thermal Resistance (R-Value): 0.75 m²·K/W

• Thermal Transmittance (U-Value): 1.33 W/m²·K

• Thermal Conductivity (λ): 0.033 W/m·K

• Temperature Stability: -40°C to +90°C

• Construction: Reflective aluminium foil / air bubble core / self-adhesive backing

Typical Uses

• Camper vans and motorhomes

• Car, van, and 4x4 conversions

• Boats, caravans, and mobile homes

• Agricultural and industrial vehicles

• General DIY insulation applications

Installation Instructions

1. **Prepare the Surface** – Ensure the area is clean, dry, and free from dust, oil, or loose debris

before applying.

2. **Measure and Cut** – Measure the surface area and cut the insulation to size using a sharp

knife or scissors.

3. **Peel Back the Liner** – Carefully peel away a section of the release paper to expose the

adhesive backing.

4. **Apply Gradually** – Begin sticking the insulation from one edge, smoothing it down firmly as

you go to prevent air bubbles.

5. **Seal Edges (Optional)** – For extra durability or moisture resistance, seal the edges with

aluminium foil tape.

6. **Avoid Overstretching** – The material is flexible but should not be stretched during installation

to maintain performance.

Maintenance

Wipe clean with a damp cloth when necessary. Avoid using solvents or harsh chemicals on the

reflective surface.